Lay unit on its back and slot the adjustable legs in.
Rotate the legs into the locked position.
Stand the unit upright and turn the foot basesection to adjust the level of the unit. Leg adjustment is -10mm down and +20mm up.
Lay Plinth in front of the cabinets to fit to and mark the centre of leg on plinth and the centre of the plinth.
Screw the plinth clip back plate central to the markings made in the last step. Then slide the plinth clips onto the back plates.
Finally offer the plinth with the clips into place and slide the clips onto the back plates to line up with the legs before pushing the plinth into place allowing the clips to spring around the legs.
When fitting side return plinths, fit plinth clips to plinth in the previously mentioned way, making sure to fit the clips above the centre of the plinth. This will prevent the front clips from clashing.
